|
Maintenance Workshop |
|
EMC Badr Workshop is build according to good Engineering Standard in order to include specialized activities in addition to the conventional maintenance and machining facilities as:- Turbines section.
- Drilling equipment.
- Wide range of hand tools.
- All Caterpillar special & measurement tools.
- Welding Machines (Diesel & Electrical Transformers).
- Air Compressors with different capacity.
- Lifting equipment (Cranes, Forklifts, Basket Trucks, etc…).
- Cranes, Forklifts, Man Lifters, Loaders, Trucks, Baskets & Scissors.
- Hydraulic Systems.
- Heavy / Fire Trucks.
- Generators Variable Rates (250 Kw to 2 Mw).
- Cranes (30 ton to 500 ton).
- Loaders & Graders (Earth Moving).
- Pumps & Compressors.
- Welding Machines.
- Load Bank Rental for Turbine Test.
|
Electronic Lab. :- Using well trained & certified Staff.
- Our most updated & powerful Equipment.
- Repairing Single, double & multilayer cards.
- Layout component drawing for the cards.
- Testing Integrated Circuit Inside & Outside Card.
- Testing Devices:
- DATAMAN-48PRO Advanced Universal Programmer.
- Dual Power Supply (Variable Voltage & Measure Current).
- LCR 400 Bridge Measure Capacitor‘s, Coils & Resistors.
- Variable Transformer (AC output).
- Huntron Tracker (compare cards).
- TG330-Function Generator (Generate Different Pulses).
- Linear & Digital (IC Tester).
- Soldering Weller Station (Normal Component).
- Soldering Weller Station (SMD Component).
- Fluke Multimeter Measure (Volt, Current, Resistance, Capacitance, Diodes, etc.).
- Atlas - DCA55 Measure (All Kinds of Transistors).
- Atlas - SCR100 Measure (Thyristor Triac, Diodes).
|
Calibration Lab. :- EMC Have The Tools Which Can Support Clients For The Calibration Activities:
- PSV Test Bench.
- Relay & Circuit Breaker Tester.
- Gauge Tester.
|
|
|
|
|